3D Overview
1 unit = 1.0 mm · Drag to orbit, scroll to zoom
Airbags: Stowed (0%)
Trigger Airbag Deploy (18 ms)
Case: On (Phone + Case)
Phone Inside: Shown
Annotations: On
Case Option:
Transparent Clear
Smoke Cutaway
Solid Matte
iPhone 18 Pro Max:
Black
Silver
Glacier
Burgundy
Real-Scale Envelope & NDP Specs
Exact iPhone 18 Pro Max aluminium unibody, full-width horizontal Pro Fusion camera plateau (triple lenses + Flash + Mic + LiDAR), and re-engineered airbag case.
iPhone 18 Pro Max
163.4 × 78.0 × 8.75 mm
249 g
N₂ 180 bar
1. Reference vs. Production Dimensions
Feature
Ref. Sketch
iPhone 18 PM
Case NDP
Height
155.0 mm
163.4 mm
168.2 / 173.4*
Width
75.0 mm
78.0 mm
82.8 / 88.0*
Body Depth
—
8.75 mm
12.05 mm†
Camera / Pad Max
—
13.77 mm
16.95 mm‡
Camera Plateau Cutout
Square
70.0 × 36.5 mm
72.8 × 39.3 mm
*Wall outer / Corner airbag bulb outer. †Includes 1.8 mm rear shell + 1.5 mm front screen lip. ‡Includes 5.4 mm Ø N₂ canister cradle + 0.7 mm rear pad lid.
2. Z-Stack & Full-Width Plateau Clearance
Layer (from Front Glass Z = 0)
Z Offset
Clearance
Front Protective TPU Lip
+1.50 mm
+1.50 mm screen
Phone Aluminium Unibody Back
-8.75 mm
Datum
Open Plateau Rim (72.8×39.3)
-14.57 mm
+0.80 mm vs lens
iPhone Plateau / Lens Tip
-11.54 / -13.77
Recessed
Raised Rear Pad Outer Lid
-15.45 mm
3.65 mm Y-gap
3. Airbag Gas Budget (N₂ @ 180 bar)
1.56× Safety Margin
2× Lower Bladders: 17.0 mL
2× Upper Bulbs: 13.0 mL
Total Inflated Vol: 30.0 mL
Deploy Pressure: 1.65 bar abs
Required (+15% line): 57.0 mL STP
0.51 mL @ 180 bar: 89.0 mL STP
4. Case Materials & Sub-Assemblies (BOM)
Perimeter Bumper & Corner Bulbs: Bayer Desmopan 9385A TPU (85A Shore), 2.4 mm wall, R 14.5 mm corner pockets (Crystal Clear or Matte Smoke).
Rear Structural Shell & Plateau Rim: Optical Clear or 20% Glass-Filled Polycarbonate (1.8 mm wall) with 72.8 × 39.3 mm full-width open camera cutout.
iPhone 18 Pro Max Official Finishes: Black (#242424), Silver (#C4C4C4), Glacier (#A3B1C4), Burgundy (#4D1821) matched to Apple Support 148591.
Corner Airbag Bladders (4×): RF-welded Ripstop TPU/Nylon 0.25 mm film; stowed inside corner bulbs clearing the full-width plateau; deployed lift +11.5 mm.
Electronics & Pneumatic Pad: 1.4 mm FR4 PCB (MCU + 6-axis IMU + barometer), 380 mAh LiPo, 316L SS N₂ canister (Ø 5.4 × 36 mm) + outer-channel Ø 1.8 mm Pebax tubing.
Device geometry & button specs verified against
Apple Support — iPhone 18 Pro Max Tech Specs (148591) .